5
产品介绍
EA-ELR 11500-20 3U为德国EA较新推出的回馈式电子负载,在进口直流电子负载中被广泛用于汽车测试,光伏测试等领域。
EA-ELR 11500-20 3U产品技术规格书(点击右键另存为)德国EA代理,上海雨芯仪器科技有限公司提供
EA-ELR 11500-20 3U Features
Wide range input, 110 V - 240 V +10 % 1ph AC
Active Power-Factor-Correction, typical 0.99
Regenerative with energy recovery into the grid
Very high efficiency up to over 95 %
Voltage from 0 - 80 V up to 0 - 1500 V
Currents from 0 - 6 A up to 0 - 120 A
Flexible power regulated DC input stages (autoranging)
Regulation mode CV, CC, CP, CR with fast crossover
Digital regulation, high resolution with 16bit ADCs and DACs, selection of control speed: Normal, Fast, Slow
Color 5“ TFT display with touch control and intuitive user interface
Galvanically isolated Share-Bus for parallel operation of all power classes in the 10000 series
Master-Slave bus for parallel operation of up to 64 units of all power classes in the 10000 series
Integrated function generator with predefined curves
Integrated battery test mode
Photovoltaics test mode, MPPT
Command langes and drivers: SCPI and ModBus,LabVIEW, IVIBuild-in Interfaces
USB
Ethernet
Analog
USB Host
Master-Slave-Bus
Share-Bus
Software
EA-Power Control
Optional Interfaces
CAN
CANopen
RS232
Profibus
EtherCAT
Profinet, with one or two ports
Modbus, with one or two ports
Ethernet, with one or two ports
Technical Specifications EA-ELR 11500-20 3U DC-Input Voltage range 0 - 1500 V Ripple rms CV ≤400 mV BW 300 kHz Ripple and noise p-p CV ≤2000 mV BW 20 MHz UMin for IMax (Sink) <4 V Current range 0 - 20 A Power range *1 0 - 10000 W Resistance range 2.6 Ω - 4500 Ω Output capacity 90 μF Efficiency up to 95.5% *1 Isolation Negative DC-Pol <-> PE ±1500 V DC Positive DC-Pol <-> PE +2000 V DC Article number 33200839 *1 ** Power and ** Output voltage
General specifications AC Input Voltage, Phases 208 V / 380 V / 400 V / 480 V ±10%, 3ph AC (208 V 3ph AC with Derating to 9 kW) Frequency 45-66 Hz Power factor >0.99 Leakage current < 5 mA Overvoltage category 2 Pollution degree 2 DC Input static Load regulation CV ≤0.05% FS (0 - ** load, constant input voltage and constant temperature) Line regulation CV ≤0.01% FS (208 V - 480 V AC +10% input voltage, constant load and constant temperature) Stability CV ≤0.02% FS (Over 8hrs interval following 30 minutes warm-up, constant input voltage, load and temperature) Temperature coefficient CV ≤30ppm/°C (Following 30 minutes warm up) Compensation (Remote Sense) ≤5% UNominal Load regulation CC ≤0.1% FS (0 - ** load, constant input voltage and constant temperature) Line regulation CC ≤0.01% FS (208 V - 480 V AC +10% input voltage, constant load and constant temperature) Stability CC ≤0.02% FS (Over 8hrs interval following 30 minutes warm-up, constant input voltage, load and temperature) Temperature coefficient CC ≤50ppm/°C (Following 30 minutes warm up) Load regulation CP ≤0.3% FS (0 - ** load, constant input voltage and constant temperature) Load regulation CR ≤0.3% FS + 0.1% FS current (0 - ** load, constant input voltage and constant temperature) Protective functions OVP Overvoltage protection adjustable, 0 - 110% UNominal OCP Overcurrent protection adjustable, 0 - 110% INominal OPP Overpower protection adjustable, 0 - 110% PNominal OT OT Overtemperature protection, output shuts down in case of insufficient cooling DC Input dynamic Rise time 10 - CC ≤10 ms Fall time 90 - 10% CC ≤10 ms Display accuracy Voltage ≤0.05% FS Current ≤0.1% FS Insulation AC Input to DC Input 3750 Vrms (1 Minute), creepage >8 mm AC Input to case (PE) 2500 Vrms DC Input to case (PE) Depending on the model, see model table DC Input to Interfaces 1000 V DC (Model up to 360 V output), 1500 V DC (Model from 500 V output) Interfaces digital Built-in, galvanically isolated USB, Ethernet (100 MBit) for communication
1x USB Host for data acquisitionOptional, galvanically isolated CAN, CANopen, RS232, ModBus TCP, Profinet, Profibus, EtherCAT, Ethernet Interfaces analog Built-in, galvanically isolated 15-pole D-Sub Signal range 0 - 10 V or 0 - 5 V (switchable) Inputs U, I, P, R, remote control on/off, DC input on/off, resistance mode on/off Outputs Monitor U and I, alarms, reference voltage, status DC input, status CV/CC Accuracy U / I / P / R 0 - 10 V ≤0.2%, 0 - 5 V ≤0.4% Device configuration Parallel operation Up to 64 units of any power class in series 10000, with Master-Slave-Bus and Share-Bus Safety and EMC Safety EN 61010-1
IEC 61010-1
UL 61010-1
CSA C22.2 No 61010-1
BS EN 61010-1EMC EN 55011, class B
CISPR 11, class B
FCC 47 CFR Part 15B, Unintentional Radiator, class B
EN 61326-1 include tests according to:
- EN 61000-4-2
- EN 61000-4-3
- EN 61000-4-4
- EN 61000-4-5
- EN 61000-4-6Safety protection class 1 Ingress Protection IP20 Environmental conditions Operating temperature 0 - 50 °C Storage temperature -20 - 70 °C Humidity ≤80% RH, non-condensing Altitude ≤2000 m (≤6600 ft) Mechanical construction Cooling Forced air flow from front to rear, temperature controlled fans Dimensions (B x H x T) 19“ x 3U x 668 mm (Enclosure only, not over all) Weight 32.8 kg (72 lb)